Win32でのクライアントセットアップ方法

ここでは、Microsoft Windows95及びWindowsNT用のクライアントを セットアップする方法を紹介します。
Win32プラットホーム用クライアントには、いくつかの種類がありますが、 ここでは、12月9日時点での最新版である、rc56402-260-win32-x86.zipと いうアーカイブに基づいて説明します。

まず、WinZipのようなツールを利用して、任意のディレクトリに アーカイブを解凍して下さい。解凍に成功すると、

の3つのファイルができます。

次にrc564.exeを実行して下さい。カレントディレクトリに設定ファイル (rc564.ini)がない場合は、設定モードで起動します。以下の一連の設定を 完了すると、設定ファイルが作成されます。
既に設定ファイルがある場合は、"-config"というオプションを付けて 実行する事で設定モードになります。

C:\rc564>rc564

RC5-64 v2.6402.265 client - a project of distributed.net
Copyright distributed.net 1997
Visit http://www.distributed.net/ for more information. 'rc564 HELP' for usage

Error reading ini file - Using defaults

CLIENT CONFIG MENU
------------------
1)  Email to report as [default:rc5@distributed.net] ==> rc5@distributed.net
2)  Blocks to Buffer [in:out] [default:10] ==> 10:10
3)  Blocks to complete in run [default:0] ==> 0
4)  Hours to complete in a run [default:0.0] ==> 0.0
5)  Keys per timeslice - for Macs, Netware, Win16, etc [default:65536] ==> 65536
6)  Level of niceness to run at [default:0] ==> 0
7)  File to log to [default:] ==> 
8)  Network communication mode [default:1] ==> 1
15)  Optimize performance for CPU type [default:-1] ==> -1
16)  Message Mailing (bytes) [default:0] ==> 0
22)  Checkpoint information filename [default:none] ==> none
0)  Quit and Save
Choice --> 
ここで、まず " 1 " を入力して、E-mail addressを 入力します。
Choice --> 1
Email to report as (64 characters max) [rc5@distributed.net] --> 
ここで、E-mail addressとして、" rc5@nisoc.or.jp " を 入力して下さい。
Email to report as (64 characters max) [rc5@distributed.net] --> rc5@nisoc.or.jp

CLIENT CONFIG MENU
------------------
1)  Email to report as [default:rc5@distributed.net] ==> rc5@nisoc.or.jp
2)  Blocks to Buffer [in:out] [default:10] ==> 10:10
3)  Blocks to complete in run [default:0] ==> 0
4)  Hours to complete in a run [default:0.0] ==> 0.0
5)  Keys per timeslice - for Macs, Netware, Win16, etc [default:65536] ==> 65536
6)  Level of niceness to run at [default:0] ==> 0
7)  File to log to [default:] ==> 
8)  Network communication mode [default:1] ==> 1
15)  Optimize performance for CPU type [default:-1] ==> -1
16)  Message Mailing (bytes) [default:0] ==> 0
22)  Checkpoint information filename [default:none] ==> none
0)  Quit and Save
Choice --> 
続いて、" 8 " を選択します。
Choice --> 8
Network communication mode 
  mode 1) I can communicate freely to the Internet on all ports.
  mode 2) I can communicate freely on telnet ports
  mode 3) I can communicate freely on telnet ports, but need uuencoding
  mode 4) I have a local HTTP proxy that I can go through
  mode 5) Let me specify custom network settings (expert mode)
 [1] --> 
ここで、" 5 " を選択します。expert modeになるので、 全てのパラメータを入力する事ができます。
 [1] --> 5

CLIENT CONFIG MENU
------------------
1)  Email to report as [default:rc5@distributed.net] ==> rc5@nisoc.or.jp
2)  Blocks to Buffer [in:out] [default:10] ==> 10:10
3)  Blocks to complete in run [default:0] ==> 0
4)  Hours to complete in a run [default:0.0] ==> 0.0
5)  Keys per timeslice - for Macs, Netware, Win16, etc [default:65536] ==> 65536
6)  Level of niceness to run at [default:0] ==> 0
7)  File to log to [default:] ==> 
8)  Network communication mode [default:1] ==> 5
9)  Preferred KeyServer Proxy
     [default:rc5proxy.distributed.net] ==> rc5proxy.distributed.net
10)  Preferred KeyServer Port [default:2064] ==> 2064
13)  UUE/HTTP mode [default:0] ==> 0
15)  Optimize performance for CPU type [default:-1] ==> -1
16)  Message Mailing (bytes) [default:0] ==> 0
22)  Checkpoint information filename [default:none] ==> none
0)  Quit and Save
Choice --> 
続いて、" 9 " の、Preferred KeyServer Proxyを 選択します。rc5proxy.nisoc.or.jp で、代理鍵サーバーが動いていますので、せっかくですので指定 しましょう。
Choice --> 9
Preferred KeyServer Proxy
     (DNS or IP address)
 [rc5proxy.distributed.net] --> rc5proxy.nisoc.or.jp

CLIENT CONFIG MENU
------------------
1)  Email to report as [default:rc5@distributed.net] ==> rc5@nisoc.or.jp
2)  Blocks to Buffer [in:out] [default:10] ==> 10:10
3)  Blocks to complete in run [default:0] ==> 0
4)  Hours to complete in a run [default:0.0] ==> 0.0
5)  Keys per timeslice - for Macs, Netware, Win16, etc [default:65536] ==> 65536
6)  Level of niceness to run at [default:0] ==> 0
7)  File to log to [default:] ==> 
8)  Network communication mode [default:1] ==> 5
9)  Preferred KeyServer Proxy
     [default:rc5proxy.distributed.net] ==> rc5proxy.nisoc.or.jp
10)  Preferred KeyServer Port [default:2064] ==> 2064
13)  UUE/HTTP mode [default:0] ==> 0
15)  Optimize performance for CPU type [default:-1] ==> -1
16)  Message Mailing (bytes) [default:0] ==> 0
22)  Checkpoint information filename [default:none] ==> none
0)  Quit and Save
Choice --> 
これで設定は終りです。最後に" 0 "を入力すると、 設定がrc564.ini に記録されて終了します。もし、途中で設定を 変える場合は、
C:\rc564>rc564 -config
と実行する事により、設定モードで起動します。


戻る

Copyright(C) 1997 NISOC RC5 Cracking team "Team NISOC"